Tascam Model 12
Keverő - felvevő - audió interfész
Bruttó listaár:296900 Ft
Eladási ár:296900 Ft
Nettó ár:233780 Ft
Kedvezmény:
Adó összege:63120 Ft
Gyártó:Tascam
Leírás
A Model 12 egy kompakt, "minden egyben" készülék, amely professzionális minőségű a, hagyományos analóg keverők felületét idéző mixer, soksávos rögzítőt és hangkártyát tartalmaz egyben, sok fontos szolgáltatással és lehetőséggel.
Gyakran merül fel az igény, hogy egy zenei produkciót színpadon vagy próbateremben sok sávon rögzítsünk, lehetőleg számítógép nélkül. A Model 12 erre is megadja a lehetőséget, és a felvett anyagon tovább tudunk dolgozni akár a készüléken, akár egy csatlakoztatott számítógépen az ismert DAW szoftverek valamelyikével. Természetesen a rögzítés is történhet azonnal a számítógépre, ilyen esetben a készülék biztosítja az alapvető DAW kontrol funkciókat is.
A keverőn találunk kompresszor és EQ funkciókat, és van egy beépített effekt processzor is a legfontosabb effektek lehetőségével.
A stúdió- vagy színpadi rendszerbe illesztéshez hagyományos MIDI csatlakozókat is találunk a hátoldalon.
A rendkívül sokoldalú hibrid készüléket házi stúdiózáshoz, demó és projekt munkákhoz, videó hang munkákhoz és live streamre egyaránt ajánljuk. A felhasználási lehetőségek köre igen nagy.
- 10-channel mixer with built-in 12-track recorder and USB audio interface
Mixer features
- Ten analogue inputs on six mono and two stereo channels
- Eight mono mic inputs on XLR connectors with switchable phantom power (48 V)
- Ultra-HDDA microphone preamps on inputs 1–6
- Eight channels can be used with high-impedance instruments like electric guitars/basses
- Ten balanced line inputs (six mono, two stereo)
- Multi-purpose stereo channel for input from mobile devices via Bluetooth or TRRS smartphone connector (CH 9/10)
- Inserts on input channels 1 and 2
- Mix-minus function on smartphone mini-jack input
- Two Aux outputs (monitor, effects) and two stereo outputs with independent master faders (Main, Sub)
- Monitoring can be selected between PFL (pre-fader), AFL (after-fader) and SIP (solo-in-place)
- Dedicated click output with tap tempo feature
- One-knob compressor for all input channels
- Three-band equalizer with sweepable mids for all input channels
- Switchable low-cut filter (100 Hz) on each channel
- Semi-parametric EQ with sweepable mid band for aux or main outputs
- Built-in Bluetooth receiver for wireless playback
- On-board effects processor
- 16 effects types
- Can be used on all input channels, aux busses, sub and main stereo bus
- Can be turned on/off by an optional footswitch (Tascam RC-1F)
- Compact 60-mm faders
- 12-segment LED output level meters
- XLR balanced outputs for main stereo bus
- TRS balanced outputs for sub and aux outputs
- Two headphones outputs with separate level controls
Recorder features
- Tascam multi-track recording engine, uses SD cards as storage media (up to 512 GB)
- Up to 12 tracks (10 input channels + stereo mix) can be recorded without the need for a computer
- Recording/playback format: Linear PCM (WAV format, 44.1/48 kHz, 16/24 Bit)
- Overdubbing, punch in/out recording
- Multi-track playback for advanced live performance
- Illuminated Play/Record/Stop buttons for better legibility in poorly lit environments
Audio interface features
- USB audio interface for use with Windows (ASIO) and Mac (Core Audio) computers
- Transfer to computer: 12 channels (all 10 inputs + stereo mix)
- Transfer from computer: 10 channels, assignable to each channel input
- Audio resolution 44.1/48 kHz, 16/24 bit
- USB MIDI interface function
- Simple DAW control support via HUI/MCU protocol emulation
- Avid Pro Tools
- Apple Logic Pro
- MOTU Digital Performer
- Steinberg Cubase
- Ableton Live
- Cakewalk by BandLab
- PreSonus Studio One (since firmware v1.30)
- Cockos Reaper (since firmware v1.30)
- Steinberg Cubasis 3.3 (since firmware v1.30)
Other features
- MIDI input and output
- Support for MIDI timecode (MTC) and MIDI clock output with song position pointer (SPP)
- Simple and quick menu operation with multi-jog dial
New in firmware version 1.10
- Vamp playback allows to automatically or manually repeat up to ten previously marked intervals per song
- Metronome tempo can now also be changed with an audible click
- Three volume options available for the accented note of the metronome click
- New sound pattern with four bars for the count-in
New in firmware version 1.20
- Adjustable time delay for the output signal
- Allows to compensate for a time offset between image and sound signal, which can occur, for example, during live streaming to the Internet
- As a result, image and sound reach the audience synchronously
- In addition to the signal output via USB, the signal from the output connectors can also be delayed (for monitoring or in conjunction with a hardware encoder such as the Tascam VS-R264 or VS-R265)
- Setting range: 1–2000 milliseconds in steps of 1 ms or 100 ms
New in firmware version 1.30
- Additional DAW software that can be controlled using HUI/MCU protocol (see above)
- In addition to the post-fader master signal, the pre-fader master signal can be selected for monitoring by headphones. As a result, the master signal can still be monitored when the main channel is muted
- The SUB and MAIN output levels can each be attenuated by up to 40 dB, to allow small speakers to be used for monitoring without overloading their inputs.
| Recorder | |
|---|---|
| Recording media | SD (512 MB – 2 GB) SDHC (4–32 GB) SDXC (64–512 GB) Class 10 or higher required |
| File system | FAT16 (SD), FAT32 (SDHC), exFAT (SDXC) |
| Recording file format | WAV (BWF, maximum file size: 2 GB) |
| Playback formats | WAV (BWF) |
| Sampling frequency | 44.1 kHz, 48 kHz |
| Bit depth | 16 bit, 24 bit |
| Recordable channels | 12 channels max. (10 inputs + stereo mix) |
| Audio inputs and outputs | |
|---|---|
| Microphone inputs (CH 1–6, 7/8, 9/10) | XLR-3-31, balanced (1: GND, 2: HOT, 3: COLD) |
| Nominal input level | –8 dBu |
| Maximum input level | +10 dBu |
| Minimum input level | –58 dBu |
| Gain adjustable range | 0–50 dB |
| Input impedance | 1.8 kΩ |
| Line inputs (CH 1–10) | 6.3-mm TRS phone jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND) |
| Nominal input level | +4 dBu |
| Maximum input level | +22 dBu |
| Gain adjustable range | –10 dB to +40 dB (CH 1–6) –20 dB to +30 dB (CH 7/8, 9/10) |
| Input impedance | 22 kΩ |
| Instrument inputs (CH 1–6, 7, 9) | 6.3-mm TS phone jack, unbalanced (Tip: HOT, Ring: GND, Sleeve: GND) |
| Nominal input level | –4.2 dBV |
| Maximum input level | +13.8 dBV |
| Gain adjustable range | –10 dB to +40 dB (CH 1–6) –20 dB to +30 dB (CH 7, 9) |
| Input impedance | 1 MΩ |
| Inserts (CH 1–2) | 6.3-mm TRS phone jack (Tip: SEND, Ring: RETURN, Sleeve: GND) |
| Nominal input level | 0 dBu |
| Maximum input level | +18 dBu |
| Input impedance | 5 kΩ |
| Nominal output level | 0 dBu |
| Maximum output level | +18 dBu |
| Output impedance | 100 Ω |
| Music/Talk input (CH 9/10) | 3.5-mm TRRS mini jack, unbalanced |
| Maximum input level | +8 dBV |
| Nominal input level | –10 dBV |
| Input impedance | 10 kΩ |
| Main output | XLR-3-32, balanced (1: GND, 2: HOT, 3:COLD) |
| Nominal output level | +4 dBu |
| Maximum output level | +22 dBu |
| Output impedance | 200 Ω |
| Sub output, Aux output | 6.3-mm TRS, balanced (Tip: HOT, Ring: COLD, Sleeve: GND) |
| Nominal output level | –2 dBu |
| Maximum output level | +16 dBu |
| Output impedance | 200 Ω |
| Phones output 1/2 | 6.3-mm stereo phone jack |
| Maximum output power | 45 mW + 45 mW (at 32 Ω) |
| Footswitch connector | 6.3-mm TS phone jack (Tascam genuine footswitch RC-1F recommended) |
| EQ | |
|---|---|
| Channel EQ | |
| Low cut | 100 Hz, –12 dB/Oct. |
| High (shelving) | 10 kHz, ±15 dB |
| Mid (peaking) | variable 100 Hz to 8 kHz, ±15 dB (Mono) fixed 600 Hz, ±15 dB (Stereo) Q = 0.5 |
| Low (shelving) | 80 Hz, ±15 dB |
| Master EQ | |
| High (shelving) | 10 kHz, ±15 dB |
| Mid (peaking) | variable 100 Hz to 8 kHz, ±15 dB, Q = 0.5/5 |
| Audio performance | |
|---|---|
| Residual output noise | –103 dBu (MAIN OUT, MAIN fader at nom.) |
| Equivalent input noise (EIN) | –128 dBu (Mono input channel at 150 Ω, GAIN at max.) |
| Total harmonic distortion (THD+N) | <0.003 mic="" in-=""> MAIN OUT, 1 kHz, GAIN at min., +2 dBu) |
| Frequency response | 20 Hz to 20 kHz, +0.1/–0.15 dB (MIC IN-> MAIN OUT) |
| Channel crosstalk | 95 dB (1 kHz, PAN fully counter-clockwise / fully clockwise) |
| Maximum gain | 74 dB (MIC to MAIN OUT) 50 dB (MIC to INSERT OUT) 74 dB (MIC to SUB OUT) 75 dB (MIC to AUX 1/2 OUT) 24 dB (USB/SD to MAIN OUT) (all EQs flat, PAN fully counter-clockwise / fully clockwise) |
| Phantom Power | DC 48 V |
| Power supply and other specifications | |
|---|---|
| Power supply | Tascam AC adapter (included, input voltage AC 100–240 V, 50/60 Hz) |
| Power consumption | 16 W |
| Dimensions (W × D × H, overall) | 343 mm × 360 mm × 99 mm |
| Weight | 4.3 kg |
| Permissible operating temperature range | 5–35 °C |
| Included items | AC adapter, USB Type-C to A cable, TRRS cable, Owner’s manual incl. warranty |
Garancia
A termékre 36 havi garanciát adunk
Napi ár
A legkedvezőbb napi árakról érdeklődjön!
